|Smith Brothers Services, LLC|
Meyer Plow Pump Rebuild -
We encourage you to get your unit to us EARLY because we usually cut off any more units from coming in every year in JULY or AUGUST!
Valid current pricing is on the Rebuild Form
You will receive the pricing that is in effect WHEN YOUR UNIT ARRIVES HERE in our shop. NO EXCEPTIONS!
(Regularly E-46 $160 + parts E-47/E-57 $260.00+parts E-60/E-58H $290.00+parts)
Right now is the best time to have your plow's power unit rebuilt. Don't let it sit until the fall with water and gunk in it. Changing the fluid is not enough to ensure trouble free operation in the future. You cannot get all the gunk out of it by draining the fluid, and flushing usually just loosens the gunk so it can clog the internal screens and passageways. Often letting it sit with no maintenance done will leave you with a seized motor in the fall. It usually takes us 4 - 5 hours to dismantle a pump and clean and test everything, and reassemble. We are very thorough! If your plow is still under the Meyer Factory Warranty, then the fluid must be changed once a year and you need to have proof that it was to keep your coverage in effect! We want to add that just because your pump is working, does not mean that everything is fine. These units do continue to work with defects. Once here in our shop, we will find them. Your unit will not leave with them. Honestly, if you don't want the rebuild done properly, please send it someplace else. We are not being arrogant, it is just that we do it right the first time, or we don't do it at all. Experience has taught us that neither of us will be happy if the job is not done properly.
Typical rebuild includes:
Meyer Plow Pump Rebuild FAQ - PLEASE READ THIS PRIOR TO DROPPING OFF OR SENDING IN YOUR PUMP!
CLICK HERE FOR PUMP SUBMITTAL FORM
While we have your pump, you MUST flush your Angle Rams. We posted two videos on You Tube to better explain how to do it.
Flush Angle Rams Part 1 Flush Angle Rams - Part 2
If you want specific parts changed, such as the Motor, Coils, and Valves, Couplers, Hose, etc. just let us know. We normally will only replace them if they need to be replaced.
New paint and decal* is optional for an additional fee. New Couplers are optional. New Hoses are optional.
*At this time only E-47, E-57, and E-60 decals are available.
We are located in Northern New Jersey on Route 94 in Hardyston, NJ in the old Recon Group building, next to Bins & Bays and the old Swing In Deli (now Firehouse Bagels). Less than a mile from North Church Road.
Smith Brothers Services, LLC
Entire site Copyright 2019 Smith Brothers Services, LLC All Rights Reserved
Our Other Sites:
Snowplowing-Contractors.com ChucksChevyTruckPages.com SmithBrothersPlowParts.com MeyerST.com
MeyerPlowHelp.com MeyerPlows.info PlowPump.info MeyerPlowPumpParts.com Home-Plow-By-Meyer.com
MeyerE-57.com MeyerE-60.com MeyerE-58H.com MeyerDrivePro.com MeyerLotPro.com MeyerE-47.com MeyerRoadPro.com
MeyerSOS.com MeyerPathPro.com MeyerVPlow.com MeyerE-72.com Smith Brothers Services on YouTube MeyerE-68.com
* Plus any parts. All pumps will need a seal kit and fluid at minimum. In season rebuild price for E-60 pumps is $280.00.